.webp)
Transport indicators are infallible and tamper-proof witnesses that accompany your products on their journey to their final destination, attached to or inside the package. Any colour changes in the indicators clearly and immediately show everyone that the relevant transport regulations have not been complied with. Our indicators detect impacts and tilting, breaches of the cold chain, and instances where prescribed humidity levels are exceeded. We are the authorised general importer for all ShockWatch, TiltWatch, WarmMark, ColdMark, ShockLog and SpotBot products from SpotSee for the DACH region, Scandinavia and Eastern Europe. Discover our wide range of products!
Easily detect impacts: our ShockWatch® impact indicators
In the Monitoring Shop, you will find high-quality shock and tilt indicators from renowned manufacturers. For our shock indicators, we rely on solutions from the ShockWatch® brand. This tried-and-tested Label, designed to be attached to packaging, is available in various versions with different sensitivity levels. This means you can purchase the right indicator for transport monitoring from us, whatever your requirements. ShockWatch® indicators clearly show whether a consignment may have been damaged by impacts during transit. At each stage of the shipping process, the condition of the indicator can be assessed at a glance. Should any damage have occurred, you can trace it back to its source. We also stock ShockWatch® impact indicators as clips, mini-clips, RFID versions and – for curved surfaces – the Flex version. You can also mark all packages with the eye-catching yellow ShockWatch® warning tape.
TiltWatch tilt indicators to alert you when the angle is too steep
When it comes to tilt indicators, we rely on the TiltWatch® brand. These transport indicators allow you to verify whether goods susceptible to tipping have maintained the specified upright position during transport. Two examples: The TiltWatch® Plus indicator can detect even slight tilts from 30° and displays them in various increments up to 80°. For less sensitive products, the manufacturer’s XTR variant is ideal. This indicates when a tilt of more than 83° has been reached during transport.
Indicators of temperature during transport and storage
A continuous cold chain is of paramount importance, particularly in the medical and food sectors. To monitor this during transport and storage, we offer temperature indicators in our online shop. These are usually placed inside the package to be transported before dispatch and are triggered if the temperature deviates from a predefined reference value:
- ColdMark® indicators are suitable for temperature-sensitive goods. They activate once a certain threshold is reached, indicating that the products have been exposed to low temperatures.
- We also stock 3M™ Freeze-Watch™ indicators. These are ideal when freezing temperatures are undesirable.
- For products that must be stored and transported at a constant cool temperature, you should use WarmMark®. These indicators also show the potential duration for which a parcel was not exposed to the specified temperatures.
- The BloodTemp indicator is specifically designed for the transport and storage of blood products. It continuously monitors the core temperature of the blood product and indicates when it can no longer be used due to temperature deviations.
- 3M™ MonitorMark™ indicators are primarily used for outer packaging or secondary packaging. They indicate when product quality needs to be checked.
In addition, we stock temperature indicator strips capable of detecting temperature fluctuations across a range from 29 °C to 290 °C. Take advantage of our extensive selection!
Transport indicators from the experts – get advice
In addition to the shock and tilt indicators mentioned above, the Monitoring Shop also stocks humidity and time indicators. The latter allow you to attach a visual reminder to products or equipment, enabling you to identify at an early stage whether action is required. The indicator window changes colour over time until the specified interval has elapsed and it has completely changed colour. Humidity indicators allow you to monitor humidity levels during transport and storage, compliance with which is relevant for a wide range of products across all industrial sectors.
Do you have any questions about our transport indicators or the other solutions in our range? We would be happy to advise you on the respective applications of the indicators and help you find the product best suited to your needs. We look forward to hearing from you!
- Temperature range 10 °C to 32 °C
- Display in 2 °C steps
- 10 x 90 mm, self-adhesive
- Packaging unit: 10 stickers
- Intuitive Temperature Display: Color changes based on temperature variations – Green below 50°C, Amber between 50°C and 70°C, Red above 70°C.
- Immediate Response: Liquid crystal technology allows for quick and accurate temperature display, perfect for rapid action in critical situations.
- Versatile Applicability: Suitable for all metal and plastic surfaces up to 120°C, ideal for industrial applications.
- Rugged and Durable Construction: Dustproof and waterproof, ensuring reliable performance in harsh conditions.
- Reusable and Eco-Friendly: No batteries or toxic materials required, fully reversible for repeated use.
- Blood bag monitoring: Reliably checks core temperature during transport and storage.
- Irreversible indicator: Secure proof of correct transport and storage conditions.
- Easy interpretation: Clear colour change for unambiguous results.
- FDA 510(k) approval: Applies to Blood Temp 10.
- Discoloration at colder +2 °C and at warmer +8 °C (short, medium and long 2, 12 or 48 hours)
- Precise temperature monitoring for optimum conditions
- User-friendly control panel and quick access to the result
- No software required for application
- Irreversible proof of non-compliance with the cold chain
- Discoloration at colder +2 °C and cumulatively longer than 8 hours at warmer +8 °C
- Precise temperature monitoring for optimum conditions
- User-friendly control panel and quick access to the result
- No software required for use
- Irreversible evidence of non-compliance with the cold chain
- Discoloration at colder 0 °C and at warmer +25 °C
- Visual indication by discoloration when limit values are exceeded
- No software required for use
- Irreversible (irreversible) proof of non-compliance with the cold chain
- Monitoring of life science products such as medicines, samples and diagnostic products
- Designed for use in flexible barrier films: Monitors and displays relative humidity levels.
- Color Change Indicator: Shows changes in humidity through reversible indicators.
- Easy Reading: Allows for humidity reading without opening the packaging.
- Simple Installation: Can be easily screwed into the packaging film, including an installation key.
- High-Quality Materials: Meets TL 6685-0007 specification and comes with sealing rings.
- Versatile Use: Suitable for electronics, optical instruments, export packaging, bulk packaging, military and aerospace, as well as pharmaceuticals.
- Comprehensive Accessories: Package includes an installation key, indicator windows with sealing rings, and indicator cards.
- Measurement of core body temperature
- Contactless through self-application
- Measuring points: 35°C | 36°C | 37°C | 38°C | 39°C | 40°C
- Immediate early detection of fever
- Class II FDA-registered
- Single or multiple use
- Result readable in 15 seconds
- Immediate visual warning: Changes from black to red at temperatures above 50 °C.
- Liquid crystal technology: Fast and accurate response to temperature changes.
- Self-adhesive and reversible: Easy to apply and reusable.
- Durable and robust: Suitable for metal and plastic surfaces up to 120 °C.
- Ideal for occupational safety: Provides clear, immediate warnings to reduce the risk of injury.
- Rain indicator/ wetness indicator
- Self-adhesive
- Red color of the umbrella runs clearly when wet
- Minimum order quantity: 100 pieces
- Thermindex temperature measuring strips
- Reversible indicator
- Display in 5 °C steps
- Dimensions: 18 x 51 mm
- Packaging unit: 10 measuring strips
- 2-value temperature card for WarmMark and ColdMark
- For individual temperature monitoring
- Serial number
- Temperature/time indicator for temperature-sensitive products
- 2 trigger temperatures
- Mechanical shock indicator
- Ideal for monitoring heavy shipping goods
- For one-time use (single use)
- Direct attachment: Shock indicator for attachment to the product inside the packaging.
- ShockWatch Single Clip: Ideal for monitoring shock loads directly on the device.
- Combined monitoring: Supplementary to the ShockWatch Label for more precise damage indication.
- Comprehensive control: Monitors handling from production to use by the customer.
- Versatile areas of application: Perfect for rental companies of high-quality technology such as audio and video equipment.
- Impact indicator for transport monitoring
- Consecutive serial number
- Barcode
- Incl. warning label for parcel (DIN A 4)
and shipping documents (76 x 25 mm)
- QR-based impact monitoring: ShockWatch® Label QR documents critical impact events directly in the SpotSee QR Cloud via smartphone scan.
- Direct scan-to-cloud capture: Each QR scan records condition, time, location, photo and serial number digitally in the cloud.
- Clear visual alert: The indicator turns permanently red when the defined impact threshold is exceeded.
- Greater supply chain transparency: Digital documentation supports incoming inspection, quality control, claims handling and damage analysis.
- Multiple sensitivity options: Available in different versions for selecting the right indicator for various packages and shipment requirements.
- Time / temperature indicator
- 5°C / 10°C / 26°C / 31°C
- Recording time 48 hours / 1 week
- Easy interpretation
- Self-adhesive back
- Miniature impact indicator
- Irreversible discoloration after exceeding the limit value
- Indicator for direct attachment to the component or hidden in the product
- Irreversible color display: Indicates when the temperature has fallen below the limit temperature.
- Clear discoloration: Changes color when the temperature falls below the limit value.
- Fast response: Indicator changes color after 30 minutes below the temperature limit.
- Ideal for transportation: Perfect for transporting cold-sensitive products.
- Easy to apply: Self-adhesive and easy to apply.
- Indicates whether unacceptably low temperatures have occurred during transportation
- Easy to interpret
- Clear color change when the temperature falls below the limit value
- Proof of compliance with the cold chain
- No pre-activation required
- Cost-effective solution
- Reliable temperature monitoring: With the Digi-Temp horizontal thermometer, you can keep an eye on the temperature in different environments.
- Reversible color change: The thermometer indicates temperature changes with a simple color change, allowing for quick visual verification.
- Easy to install and use: The thermometer is easy to install and use, saving time and effort.
- Versatile applications: Ideal for industrial facilities, food processing plants, medical facilities and residential buildings.
- Cost-effective solution: The Digi-Temp thermometer offers an affordable way to monitor and maintain temperature standards.