.webp)
Transport indicators are infallible and tamper-proof witnesses that accompany your products on their journey to their final destination, attached to or inside the package. Any colour changes in the indicators clearly and immediately show everyone that the relevant transport regulations have not been complied with. Our indicators detect impacts and tilting, breaches of the cold chain, and instances where prescribed humidity levels are exceeded. We are the authorised general importer for all ShockWatch, TiltWatch, WarmMark, ColdMark, ShockLog and SpotBot products from SpotSee for the DACH region, Scandinavia and Eastern Europe. Discover our wide range of products!
Easily detect impacts: our ShockWatch® impact indicators
In the Monitoring Shop, you will find high-quality shock and tilt indicators from renowned manufacturers. For our shock indicators, we rely on solutions from the ShockWatch® brand. This tried-and-tested Label, designed to be attached to packaging, is available in various versions with different sensitivity levels. This means you can purchase the right indicator for transport monitoring from us, whatever your requirements. ShockWatch® indicators clearly show whether a consignment may have been damaged by impacts during transit. At each stage of the shipping process, the condition of the indicator can be assessed at a glance. Should any damage have occurred, you can trace it back to its source. We also stock ShockWatch® impact indicators as clips, mini-clips, RFID versions and – for curved surfaces – the Flex version. You can also mark all packages with the eye-catching yellow ShockWatch® warning tape.
TiltWatch tilt indicators to alert you when the angle is too steep
When it comes to tilt indicators, we rely on the TiltWatch® brand. These transport indicators allow you to verify whether goods susceptible to tipping have maintained the specified upright position during transport. Two examples: The TiltWatch® Plus indicator can detect even slight tilts from 30° and displays them in various increments up to 80°. For less sensitive products, the manufacturer’s XTR variant is ideal. This indicates when a tilt of more than 83° has been reached during transport.
Indicators of temperature during transport and storage
A continuous cold chain is of paramount importance, particularly in the medical and food sectors. To monitor this during transport and storage, we offer temperature indicators in our online shop. These are usually placed inside the package to be transported before dispatch and are triggered if the temperature deviates from a predefined reference value:
- ColdMark® indicators are suitable for temperature-sensitive goods. They activate once a certain threshold is reached, indicating that the products have been exposed to low temperatures.
- We also stock 3M™ Freeze-Watch™ indicators. These are ideal when freezing temperatures are undesirable.
- For products that must be stored and transported at a constant cool temperature, you should use WarmMark®. These indicators also show the potential duration for which a parcel was not exposed to the specified temperatures.
- The BloodTemp indicator is specifically designed for the transport and storage of blood products. It continuously monitors the core temperature of the blood product and indicates when it can no longer be used due to temperature deviations.
- 3M™ MonitorMark™ indicators are primarily used for outer packaging or secondary packaging. They indicate when product quality needs to be checked.
In addition, we stock temperature indicator strips capable of detecting temperature fluctuations across a range from 29 °C to 290 °C. Take advantage of our extensive selection!
Transport indicators from the experts – get advice
In addition to the shock and tilt indicators mentioned above, the Monitoring Shop also stocks humidity and time indicators. The latter allow you to attach a visual reminder to products or equipment, enabling you to identify at an early stage whether action is required. The indicator window changes colour over time until the specified interval has elapsed and it has completely changed colour. Humidity indicators allow you to monitor humidity levels during transport and storage, compliance with which is relevant for a wide range of products across all industrial sectors.
Do you have any questions about our transport indicators or the other solutions in our range? We would be happy to advise you on the respective applications of the indicators and help you find the product best suited to your needs. We look forward to hearing from you!
- Reliable temperature monitoring: With the Digi-Temp horizontal thermometer, you can keep an eye on the temperature in different environments.
- Reversible color change: The thermometer indicates temperature changes with a simple color change, allowing for quick visual verification.
- Easy to install and use: The thermometer is easy to install and use, saving time and effort.
- Versatile applications: Ideal for industrial facilities, food processing plants, medical facilities and residential buildings.
- Cost-effective solution: The Digi-Temp thermometer offers an affordable way to monitor and maintain temperature standards.
- QR-based impact monitoring: ShockWatch® Label QR documents critical impact events directly in the SpotSee QR Cloud via smartphone scan.
- Direct scan-to-cloud capture: Each QR scan records condition, time, location, photo and serial number digitally in the cloud.
- Clear visual alert: The indicator turns permanently red when the defined impact threshold is exceeded.
- Greater supply chain transparency: Digital documentation supports incoming inspection, quality control, claims handling and damage analysis.
- Multiple sensitivity options: Available in different versions for selecting the right indicator for various packages and shipment requirements.
- QR-based tilt monitoring: TiltWatch® XTR QR documents critical tilt events directly in the SpotSee Cloud via smartphone scan.
- Activates beyond 80° tilt: The indicator turns permanently red when the package is tilted beyond the permitted angle.
- Digital scan-to-cloud capture: Each QR scan records tilt status, time, location and serial number digitally in the cloud.
- Clear delivery inspection support: The irreversible indication helps support fast inspection decisions at delivery, handover or claim handling.
- Easy to use without extra equipment: No battery, no reader and no app required.
- Warning label for ColdMark®
- Warning label for WarmMark® temperature / time indicators
- Self-adhesive warning label
- For better visibility of the indicator
- Additional instructions for the carrier and recipient
- In English language
- Indicators for time monitoring
- Time interval 1 hour - 24 months
- Ideal for monitoring test deadlines
- Self-adhesive, easy to attach
- Monitoring of sterility: Ideal for temperature control in industrial dishwashers.
- Disinfection control: Checks compliance with disinfection temperatures, compact with dimensions of 25 x 35 mm.
- Dishwasher-safe and self-adhesive: Resistant to harsh conditions and easy to use.
- Packaging unit: Available in packs of 100 TDI indicators, practical for industrial use.
- 2-value temperature card for WarmMark and ColdMark
- For individual temperature monitoring
- Serial number
- Indicates whether unacceptably low temperatures have occurred during transportation
- Easy to interpret
- Clear color change when the temperature falls below the limit value
- Proof of compliance with the cold chain
- No pre-activation required
- Cost-effective solution
- Rain indicator/ wetness indicator
- Self-adhesive
- Red color of the umbrella runs clearly when wet
- Minimum order quantity: 100 pieces
- Blood bag monitoring: Reliably checks core temperature during transport and storage.
- Irreversible indicator: Secure proof of correct transport and storage conditions.
- Easy interpretation: Clear colour change for unambiguous results.
- FDA 510(k) approval: Applies to Blood Temp 10.
- Measurement of core body temperature
- Contactless through self-application
- Measuring points: 35°C | 36°C | 37°C | 38°C | 39°C | 40°C
- Immediate early detection of fever
- Class II FDA-registered
- Single or multiple use
- Result readable in 15 seconds
The WarmMark® Mini is a disposable time-temperature indicator that monitors temperature conditions and provides visual notification when unacceptable temperatures have been reached. It is available in different temperature sensitivity levels:
- Irreversible color change: Indicates the duration of temperature exceedance, allowing easy detection of temperature violations.
- Cost-effective solution: Ideal for the final stage of the supply chain, saving space and cost.
- Refrigerated packaging inspection: Supports the inspection of refrigerated packaging and helps with compliance.
- Versatile application: Perfect for transportation of sensitive products such as electronics and medical devices.
- Easy to use: Self-adhesive, easy to apply and store.
- Optimized decision-making: Identifies and analyzes critical WarmMark® QR cold chain areas remotely.
- Real-time monitoring: Cloud-based temperature tracking for maximum transparency.
- Easy to use: No app required, ideal for all WarmMark® QR cold chain stakeholders.
- Secure data management: Complies with 21 CFR Part 11 for data security and regulatory compliance.
- Cloud integration: Automatic data uploads for instant analysis and reporting.
- Tilt indicator, tamper-proof
- Indication of tilt angle over 83
- 3-language warning sticker included
- Self-adhesive
- serial number
- Tilt indicator
- Indication of tilt angle over 60
- Warning sticker in 3 languages incl. 2 small delivery note stickers
- Self-adhesive
- Discoloration at colder 0 °C and at warmer +25 °C
- Visual indication by discoloration when limit values are exceeded
- No software required for use
- Irreversible (irreversible) proof of non-compliance with the cold chain
- Monitoring of life science products such as medicines, samples and diagnostic products
- Discoloration at colder +2 °C and at warmer +8 °C (short, medium and long 2, 12 or 48 hours)
- Precise temperature monitoring for optimum conditions
- User-friendly control panel and quick access to the result
- No software required for application
- Irreversible proof of non-compliance with the cold chain
- Discoloration at colder +2 °C and cumulatively longer than 8 hours at warmer +8 °C
- Precise temperature monitoring for optimum conditions
- User-friendly control panel and quick access to the result
- No software required for use
- Irreversible evidence of non-compliance with the cold chain
- Time / temperature indicator
- 5°C / 10°C / 26°C / 31°C
- Recording time 48 hours / 1 week
- Easy interpretation
- Self-adhesive back
- Tilt indicator with degree scaling
- Tilt angle between 30° and 80
- Cannot be manipulated
- Self-adhesive
- Serial number
For marking temperature-controlled transports.
- 66 rm x 50 mm, PP acrylic white with 1-color print. print
- Suitable for standard hand dispenser (76 mm core)
- ShockWatch warning tape, yellow
- Printed in three languages (DE / EN / FR)
- Tape length: 66 m
- Width: 50 mm
- Material: PP
- Mechanical impact indicator
- Consecutive serial number & barcode
- Activation when attached
- Incl. warning sticker for parcel (DIN A 5)
and freight documents (76 x 25 mm)
- Mechanical impact indicator: Monitors shock-sensitive shipments when a defined impact limit is exceeded.
- Controlled activation: Activated only immediately before application for simplified handling.
- Clear visual indication: Permanent color change signals a relevant impact event.
- QR code with cloud connection: Smartphone scans record the time and date of the scan as well as the corresponding location.
- Warning labels included: Labels for clear shipment identification and additional labels for shipping documents sized 76 × 25 mm.
- Impact indicator for transport monitoring
- Consecutive serial number
- Barcode
- Incl. warning label for parcel (DIN A 4)
and shipping documents (76 x 25 mm)
- RFID-enabled shock indicator
- Enables contactless detection of triggered indicators
- Shock sensitivities from 5g to 75g
- Activation on attachment
- No battery or cable required
- Operating temperature range -25°C to 60°C / -13°F to 140°F
- Temperature/time indicator for temperature-sensitive products
- 2 trigger temperatures
- Reliable frost alarm: Warning at temperatures below 0°C for 30 or 60 minutes.
- Simple operation: User-friendly design without complicated setups.
- Compact size: Ideal for limited spaces (23 x 42 x 5.6 mm).
- Single use with irreversible display: Compliance with temperature specifications without resetting.
- Instant availability: Ready for immediate temperature monitoring.
- For use in cooling and freezing environments: Suitable for temperatures from 2°C to 8°C or -20°C to -80°C.
- Simple operation: User-friendly design for uncomplicated use.
- Compact size: With dimensions of only 23 x 42 x 5.6 mm, easy to use in different environments.
- Single use: Designed for single use with irreversible indication to ensure reliability.
- Irreversible display: Guarantees that once conditions are displayed, they cannot be reset or changed.
- Reliable temperature monitoring: High accuracy and fast update every 10 seconds.
- Flexible temperature alarm: Warning at 15°C or 25°C, flexibly adjustable.
- Simple operation: Intuitive display with Fahrenheit and Celsius option.
- Compact size: Ideal for living rooms, greenhouses or wine cellars (23 x 42 x 5.6 mm).
- Single use with options: Single use, reusable devices also available.
- Irreversible display: Permanent and reliable data, no resetting.
- Irreversible color display: Indicates when the temperature has fallen below the limit temperature.
- Clear discoloration: Changes color when the temperature falls below the limit value.
- Fast response: Indicator changes color after 30 minutes below the temperature limit.
- Ideal for transportation: Perfect for transporting cold-sensitive products.
- Easy to apply: Self-adhesive and easy to apply.
- Irreversible color change
- 50% to 90% rH
- Dimensions: 115 x 76 mm
- Content: 50 pieces
- Miniature impact indicator
- Irreversible discoloration after exceeding the limit value
- Indicator for direct attachment to the component or hidden in the product
- Direct attachment: Shock indicator for attachment to the product inside the packaging.
- ShockWatch Single Clip: Ideal for monitoring shock loads directly on the device.
- Combined monitoring: Supplementary to the ShockWatch Label for more precise damage indication.
- Comprehensive control: Monitors handling from production to use by the customer.
- Versatile areas of application: Perfect for rental companies of high-quality technology such as audio and video equipment.
- Shock indicator (single-axis)
- Irreversible design (non-resettable, single use)
- Self-adhesive back & drill holes
- Incl. warning sticker
- Shock indicator (single-axis)
- Reversible design (resettable, multi-use)
- Self-adhesive back & drill holes
- Incl. warning sticker
- Immediate visual warning: Changes from black to red at temperatures above 50 °C.
- Liquid crystal technology: Fast and accurate response to temperature changes.
- Self-adhesive and reversible: Easy to apply and reusable.
- Durable and robust: Suitable for metal and plastic surfaces up to 120 °C.
- Ideal for occupational safety: Provides clear, immediate warnings to reduce the risk of injury.
- Mechanical shock indicator
- Ideal for monitoring heavy shipping goods
- For one-time use (single use)